State the wizard's Finish and write rules precisely

The manual named too few conditions for Finish, and spec and project context read as if a skipped page of a new station were not written. It is: only a station left unchanged is written page by page.

Written-by: Claude Fable 5.2
This commit is contained in:
Rsclub2_2 committed 2026-11-18 21:32:14 +01:00
1 parent 0d0b752bed
commit 85a2984234
4 files changed
+20 -12

No files matched your search

+5 -3
View File
@@ -411,9 +411,11 @@ section records only the durable architecture and operational boundaries.
asks for name, login, locator, bands and chat category, and optionally for antenna and
power, log program, rotator and AirScout. A station set up anew gets only what the
operator said yes to: the bundled template has several integrations on, and the wizard
switches them off and says so in its summary. A page that was not shown in a run is not
written, which is what lets "leave the station unchanged" keep a profile with several log
sources as it is. The reasons and the open stage 3 are in
switches them off and says so in its summary. That holds for a new
station also when the operator skips those pages with Finish: they are part of the run and
are written with their start values. A station left unchanged is the opposite case: a page
of it is written only if the operator opened it from the summary, which is what lets such a
profile keep several log sources as they are. The reasons and the open stage 3 are in
`docs/superpowers/specs/2026-11-18-einrichtungsassistent-design.md`.
## Planned Technical Direction
@@ -107,12 +107,18 @@ Schritt öffnen und ändern. Ein übernommenes Rufzeichen bekommt so sein `/P`.
Eine Ausnahme hat das Logprogramm. Das Einstellungsfenster erlaubt mehrere Logquellen
zugleich, die Frage des Assistenten nur eine. Hat ein unverändert gelassenes Profil mehr als
eine Quelle eingeschaltet, zeigt die Zusammenfassung das an und lässt die Seite zu: sie
würde beim Öffnen alle Quellen bis auf eine abschalten.
eine Quelle eingeschaltet, zeigt die Zusammenfassung das an und hält die Seite geschlossen:
sie würde beim Öffnen alle Quellen bis auf eine abschalten.
**Geschrieben wird nur, was gezeigt wurde.** Bleibt die Station unverändert und öffnet der
Nutzer weder Antenne noch Logprogramm noch Rotor und AirScout, fasst der Assistent diese
Einstellungen nicht an.
**Bei einer unverändert gelassenen Station wird nur geschrieben, was geöffnet wurde.**
Öffnet der Nutzer weder Antenne noch Logprogramm noch Rotor und AirScout, fasst der
Assistent diese Einstellungen nicht an. Die Zusammenfassung zeigt dann, was im Profil steht,
auch wo das Einstellungsfenster mehr erlaubt als die Fragen des Assistenten: einen
DX-Cluster-Server oder eine Frequenzquelle ohne Logquelle.
Bei einer **neu eingerichteten** Station gehören alle Seiten zum Lauf. Wer sie mit „Fertig"
überspringt, bekommt ihre Startwerte geschrieben: Integrationen aus, Antennenwerte wie
gespeichert.
Die **Startwerte des Assistenten** für eine neue Station sind bewusst nicht die der Vorlage:
kein Band gewählt, Locator leer, kein Zweitchat, kein Logprogramm, kein lokaler
+2 -2
View File
@@ -20,11 +20,11 @@ Der Assistent fragt:
2. **Anmeldung** – Rufzeichen und Passwort des ON4KST-Kontos.
3. **Standort und Bänder** – Locator, aktive Bänder und Chatkategorie. Die Kategorie wird aus den Bändern vorgeschlagen und lässt sich ändern. Ein zweiter Chat ist freiwillig.
4. **Antenne und Leistung** – freiwillig: Öffnungswinkel, Antennengewinn, Antennenhöhe, Sendeleistung und Standorthöhe. Die Werte speisen die Pfadanalyse; für den Chat braucht sie niemand.
5. **Logprogramm** – keines, Win-Test, UCXLog/DXLog.net/N1MM+/QARTEST oder eine Logdatei. Port, Stationsname oder Datei erscheinen erst nach der Wahl. Mit einem Netzwerk-Logprogramm lässt sich außerdem die eigene Frequenz übernehmen und der lokale DX-Cluster-Server einschalten.
5. **Logprogramm** – keines, Win-Test, UCXLog/DXLog.net/N1MM+/QARTEST oder eine Logdatei. Port, Stationsname oder Datei erscheinen erst nach der Wahl und sind mit den gespeicherten Werten vorbelegt; eine schon eingetragene Logdatei muss also nicht neu gewählt werden. Mit einem Netzwerk-Logprogramm lässt sich außerdem die eigene Frequenz übernehmen und der lokale DX-Cluster-Server einschalten.
6. **Rotor und AirScout** – je ein Schalter; Host, Port und Kennungen erscheinen erst, wenn er gesetzt ist.
7. **Zusammenfassung** – erst **Speichern** schreibt die Einstellungen. **Speichern und verbinden** meldet danach gleich am Chat an.
Sobald Anmeldung, Locator, mindestens ein Band und die Chatkategorie stehen, führt **Fertig** direkt zur Zusammenfassung. Die Schritte 4 bis 6 lassen sich also überspringen.
Sobald die Pflichtangaben gültig sind – Anzeigename, Anmeldung, Locator, mindestens ein Band, die Chatkategorie und bei eingeschaltetem Zweitchat dessen Kategorie –, führt **Fertig** direkt zur Zusammenfassung. Die Schritte 4 bis 6 lassen sich also überspringen. Steht auf einer dieser Seiten schon ein ungültiger Wert, etwa ein Port außerhalb des Bereichs, muss er erst berichtigt werden.
Eine **neu eingerichtete** Station bekommt nur eingeschaltet, was im Assistenten bejaht wurde. Die mitgelieferte Vorlage hat Logabgleich, Frequenzübernahme, DX-Cluster-Server und AirScout an; der Assistent schaltet ab, was nicht gewählt wurde, und nennt es in der Zusammenfassung unter „Wird abgeschaltet".
+2 -2
View File
@@ -20,11 +20,11 @@ The assistant asks for:
2. **Login** – callsign and password of the ON4KST account.
3. **Location and bands** – locator, active bands and chat category. The category is suggested from the bands and can be changed. A second chat is optional.
4. **Antenna and power** – optional: beam width, antenna gain, antenna height, transmit power and site elevation. These values feed the path analysis; the chat does not need them.
5. **Log program** – none, Win-Test, UCXLog/DXLog.net/N1MM+/QARTEST, or a log file. Port, station name or file appear only after the choice. With a network log program you can also take your own frequency from it and enable the local DX cluster server.
5. **Log program** – none, Win-Test, UCXLog/DXLog.net/N1MM+/QARTEST, or a log file. Port, station name or file appear only after the choice and start from the stored values, so a log file that is already entered need not be chosen again. With a network log program you can also take your own frequency from it and enable the local DX cluster server.
6. **Rotator and AirScout** – one switch each; host, port and identifiers appear only once it is set.
7. **Summary** – nothing is written until you click **Save**. **Save and connect** logs into the chat right afterwards.
As soon as login, locator, at least one band and the chat category are there, **Finish** leads straight to the summary. Steps 4 to 6 can be skipped.
As soon as the required entries are valid – name, login, locator, at least one band, the chat category and, with a second chat enabled, its category – **Finish** leads straight to the summary. Steps 4 to 6 can be skipped. If one of those pages already holds an invalid value, such as a port out of range, it has to be corrected first.
A station that is **set up anew** gets only what was confirmed in the assistant. The bundled template has log synchronisation, frequency takeover, DX cluster server and AirScout enabled; the assistant switches off what was not chosen and names it in the summary under "Will be switched off".